Kompernass KH 1172 manual or the ventilation slots 6?

What do I do if smoke comes from the baking space 0	• Remove the power plug immediately! Allow the appliance
or the ventilation slots 6?	to cool down, then remove the baking mould 4.
	Clean the exterior of the baking mould 4 as well as
	the baking space 0, as the smoke was probably cau-
	sed by food residues. Should there be no food residues in
	the baking space 0 or on the exterior surfaces of the
	baking mould 4, do not switch the appliance back
	on. Make contact with the Customer Service department.
What has happened if the ingredients are not correctly	• A false programme has been selected.
mixed or the bread is not correctly baked through?	• The button Stop/Start ￿ has been pressed during
	operation.
	• During the baking process there was an extended
	power failure.
	• The appliance lid 2 was opened several times during
	the baking process.
	• The kneading hook q is blocked.
	Remove the ingredients and do not re-use them. Remove
	the baking mould 4 and check to ensure that the drive
	shaft 5 turns. Should this not be so, make contact with
	our customer service department.
What has happened if the baking mould 4 springs up	• The dough is too firm, that is why the kneading hook
during the kneading process?	q blocks and the baking mould 4 is pressed
	upwards. Add some fluid to the dough. Immediately
	reclose the appliance lid 2.
	• The lateral springs on the base in the housing interior
	have lost some of their tension. Remove the power
	plug from the socket. Remove the baking mould 4.
	Press the springs outwards. Replace the baking mould
	4 and close the appliance lid 2. Re-insert the plug
	into the power socket within 10 minutes. The programme
	will be continued automatically.
Why does the display 7 show „H:HH“ and the	• The appliance is still too hot from the previous baking
appliance doesn't allow itself to be started?	process. Press the button Stop/Start ￿ until the default
	adjustments appear in the display 7. Leave the appliance
	to cool down, with the lid 2 open, for approx. 20 minutes.
	Afterwards, the appliance allows itself to be used as
	normal.

- 16 -