Kompernass KH 1172 Functions of the Bread Baking Machine, Signal tone function, Repeat function

8. Programme Dough (kneading)

For the preparation of yeast dough for buns, pizza or plaits. In this Programme no baking is done.

9. Programme Jam

For making jams, preserves, jellies and fruit spreads.

10. Programme Cake

In this programe the ingredients are kneaded, allowed to rise and then baked. Use baking powder for this programme.

11. Programme Bake

For the after-baking of breads that are not brown enough, not baked through or ready-made dough. All kneading and rising processes are dispensed with in this programme. The bread is kept warm for up to one hour after the baking process. This prevents the bread from becoming too moist.

Programmme 11 bakes the bread for 60 minutes. To terminate the programme "Bake" prematurely, press the Start/Stop ￿ button until a long signal tone is heard. To switch the appliance off, remove the plug from the wall power socket.

Note:

The programme "Bake" does not allow itself to start until the appliance has cooled itself down. Before after-baking a loaf, wait until the appliance has cooled itself down.

Functions of the Bread Baking Machine

Signal tone function

The signal tone sounds

•on pressing all programme buttons,

•in the programmes 1 to 7 to give notice that grains, fruits, nuts or other ingredients can now be added,

•on reaching the end of the programme

•During the keep-warm phase, at the end of the baking process, the signal tone sounds several times in succession.

Repeat function

Should there be an electricity power cut of more than 10 minutes the Bread Baking Machine must be started anew. This is only practicable if the dough, at the time of interruption in the programme process, had not passed beyond the kneading process.

In all other cases, one must start again from the beginning! With electricity power cuts of less than 10 minutes duration the programme continues itself automatically from the appropriate position (see chapter "Memory function").

Memory function

The programme is, with the switch-on after electricity power cuts of less than ca. 10 minutes duration, automatically continued from the same position. This memory function is intended for power cuts.

Note:

Pressing the Start/Stop ￿ button terminates the programme. The programme does not allow itself to be continued.

- 7 -