Kompernass KH 2370 operating instructions Multi, Ntsc, Pal, Video, Rgb

SETUP MENU MAIN PAGE

General Setup

Speaker Setup

Audio Setup

Preferences

Exit setup

2Select the main menu item PREFERENCES with the down control button. Confirm your selection with the ENTER button. The subitems of the main menu item PREFERENCES are displayed:

Preferences Page
TV-Type	Multi
Video Output	NTSC
Audio	PAL
Subtitle
Disc-Menu
Parental
Password
Defaults

Set television standard

1The subitem TV-TYPE is the first to be automatically se- lected. Change to the options list of this subitem using the control buttons.

2Choose between the options using the control buttons:

MULTI

This setting automatically selects the standard with which the DVD/VCD/S-VCD was recorded. Only use the MULTI setting, if the combination unit is connected to a multi- standard television.

NTSC

DVDs/VCDs/S-VCDs, which have been recorded with the NTSC standard, are played back with this setting.

DVDs/VCDs/S-VCDs, which have been recorded with the PAL standard, are converted automatically so as to play back in NTSC format. Only use the NTSC setting, if you have connected the combination unit to a NTSC televi- sion.

PAL

This setting plays back DVDs/VCDs/S-VCDs, which have been recorded with the PAL standard.

DVDs/VCDs/S-VCDs, which have been recorded with the NTSC standard, are converted automatically, so as to play

back in PAL format. Only use the PAL setting if you have connected the combination unit to a PAL television.

Note:

The correct setting depends on the television, to which you have connected the combination unit. Your televi- sion – as long as it was not bought abroad – will mostly correspond to the normal television standard in your country. If you are not sure which television standard is used in your country, then check this by referring to the operating instructions of your television.

Also look at the chapter “Glossary/Index” for more infor- mation on this subject.

3Return to the list of the subitems.

Setting video output

1Select the subitem VIDEO OUTPUT using the control buttons. Change back to the list of options for this subitem.

2Choose between the options using the control buttons:

S-VIDEO

Select S-Video, if the combination unit is connected to the television by means of an S-Video cable.

RGB

Select RGB, if the combination unit is connected to the tel- evision by means of a scart cable.

Note:

If you have selected the composite video connection var- iant, it does not matter which setting you have chosen.

3Return to the list of the subitems.

Setting playback language

1Select the subitem AUDIO using the control buttons. Change to the options list of this subitem.

Here you can set the language, in which the contents of DVDs/VCDs/S-VCDs are played back.

2Select one of the languages displayed using the con- trol buttons.

Note:

DVD/VCD/S-VCD contents are only played back in the selected language if it is available on the DVD/VCD/ S-VCD. If it is not available, then the contents will be

KH 2370 15