If folders exist:
With this function you can select certain files in the current
To operate the programmed playback function, go to the corresponding chapter and continue reading.
SINGLE
The currently selected file is played back once.
REP-ONE
The currently selected file is played back repeatedly. The repeat playback is continued until you stop the playback by pressing the STOP button.
Selecting playback mode
1If a file is being played back, first of all stop the play- back with the STOP button.
2Change from the list of the files to the mode selection bar with the right control button. Firstly the FOLDER playback mode is selected automatically.
3You switch through the different playback modes with the up and down control buttons.
4If the required playback mode is displayed, then exit the mode selection bar with the left control button. The marking is now in the list of the files of the select- ed
5To start the playback in the set mode, press the PLAY button. The playback starts with the marked file in the list of files.
Programmed playback (Program)
If you have selected the PROGRAM PO mode, to select sev- eral files for programmed playback:
1Change back to the list of the files of the current sub- folder using the control buttons.
2Select the first file to be programmed using the control buttons.
Note:
If folders exist: You can only select files for programmed playback from the currently selected
3Confirm the selection by pressing on the ENTER button on the remote control. The selected file is now dis- played as the first programmed file on the top of the SMART NAVI menu,.
Example: If you have programmed the fifth file (in the current
4Repeat steps 1 and 2, until all required files have been programmed.
5Then press the STOP button.
6Press the PLAY button to start the playback of the pro- grammed files.
7To delete the programmed playback, change to anoth- er playback mode.
Cleaning the combination unit
Clean the casing of the combination unit only with a slightly damp cloth and a mild detergent. Pay attention that no moisture enters into the combination unit!
Clean the inside of the disc tray – if necessary – only with a clean dry brush (e. g. lens brush, can be bought in special- ised camera shops). Never clean the inside of the disc tray with a wet cloth!
Warning!
If moisture penetrates into the combination unit, there is a risk of getting an electric shock! In addition this can cause irreparable damage to the combination unit!
To rectify malfunctions and errors
Nothing appears on the display/ combination unit shows no function, although it is switched on
ACheck whether the power cord has been plugged into the power socket properly.
BCheck whether the power socket, in which you have plugged the power cord of the combination unit, has electric current, by connecting another device to the power socket. If necessary, plug in the power cord of the combination unit into another power socket.
KH 2370 | 33 |
