television, then check this by referring to the operating instructions of your television.
NORMAL/PS
Picture format 4:3 Pan & Scan; when playing films with for- mat 16:9, the left and right part of the picture are cut off. This means that the height of the screen is utilized as far as possible.
NORMAL/LB
Picture format 4:3; when playing films with format 16:9, black bars can be seen on the upper and lower part of the picture.
WIDE
Wide screen format16:9; when playing films with format 16:9 with 16:9 (1.78:1) wide screen televisions, the picture appears without black bars on the upper and lower parts of the picture and without the right and left part of the picture being cut off.
3Return to the list of the subitems.
Setting the language of the OSD menus
1Select the subitem OSD LANG using the control buttons.
Here you can set the language in which the OSD menu is displayed.
GENERAL PAGE |
|
TV Display |
|
OSD Lang | English |
Scr Saver | French |
| German |
| Italian |
| Portuguese |
| Spanish |
Main page |
|
|
|
2Select the requested language in the list of options us- ing the control buttons.
3Return to the list of subitems.
Switch on the screensaver
1Select the subitem SCR SAVER using the control buttons.
Info:
The screensaver prevents a picture, which has been dis- played for a long time, from being burned into the tel- evision screen. If the screensaver is switched on, this will automatically be shown as soon as
•the OSD menu is displayed for a longer period of time on the television screen and
•at the same time no buttons are pressed on the re- mote control/on the front of the combination unit.
2Select between ON and OFF in the list of options using the control buttons.
3Return to the list of subitems. Select the subitem MAIN PAGE using the control buttons, to return to the main menu.
Loudspeaker settings
The subsequent settings apply to the sound reproduc- tion by means of the surround loudspeakers and the sub- woofer of the combination unit. If you would like to use an external audio component for the sound reproduction then you have to carry out the settings on this component. Check the operating instructions to find out how to carry out these settings on the audio component.
In order to get an optimal sound, it is necessary to adjust the sound reproduction to
•the conditions at the installation location of the combi- nation unit and
•your personal preferences
To do this:
1Select the menu item SPEAKER SETUP in the main menu. In the menu SPEAKER SETUP, the following is displayed:
SPEAKER SETUP |
|
Downmix | Stereo |
Center | OFF |
Rear |
|
Subwoofer |
|
Cntr Delay |
|
Rear Delay |
|
Test Tone |
|
|
|
2Select the subitems in the list one after the other:
DOWNMIX
Select the option STEREO, if you
•have connected the combination unit to a stereo tel- evision and
•would not like to use the surround loudspeakers for the sound reproduction or
KH 2370 | 17 |
