Kompernass KH 2370 operating instructions General functions of the combination unit

General functions of the combination unit

Setting playback volume

Press the Vol + button to increase the playback volume. To decrease the playback volume press the Vol – button.

The change in the volume between MIN (sound off) and MAX (maximum volume) will be shown in the display.

Switching the playback sound to mute (Mute)

To switch the playback sound to mute, press the but- ton while playing back DVDs, VCDs/S-VCDs, audio CDs as well as CD-Rs/CD-RWs with MP3 files. If you would like to switch the playback sound back on, then press the button once more.

Equalizer functions

The combination unit has a five-step equalizer function. With this function you can, in addition, adjust the sound playback to suit your personal hearing preferences. To switch on the equalizer function, press the PRE-EQ button.

Every time you press the PRE-EQ button, you switch on one of the equalizer settings JAZZ, ROCK, CLASSIC, POP and FLAT. Each of these settings has its own characteris- tic emphasis of high, medium and low tones (basses). The equalizer setting at any one time appears in the display of the combination unit.

Setting the clock

To set the time display shown on the display of the combi- nation unit:

1If a disc is being played back: First of all stop the play- back by pressing the STOP button twice.

2Press the MODE button once. The currently input time will be shown in the display of the combination unit.

3Press the CLK ADJ button once. The first two digits of the time display now flash.

4Set the first two digits of the time display to between 00 and 23. Use the SKIP forwards and SKIP backwards button to do this.

5Subsequently press the CLK ADJ button. The last two digits of the time display now flash.

6Set the last two digits of the time display to between 00 and 59. Use the SKIP forwards and SKIP backwards button to do this.

7To save the new input time, press the CLK ADJ button again.

Using the timer

The combination unit can switch itself on automatically at a fixed time with the timer function. You can select wheth- er an audio CD should be played back or the radio should be switched on.

Note:

If you would like to use the timer function to switch on the radio, then the radio station must be saved.

Look at the chapter “Radio mode” for more information on this subject.

For the timer function to work properly, the time in the display of the combination unit has to be set correctly. Check this and, if necessary, set the correct time. To switch on the timer function:

1If a disc is being played back: First of all stop playback by pressing twice on the STOP button.

To switch on the audio CD playback:

2Put the audio CD, which you would like to play back with the timer function, into the combination unit.

3Press the CD/DVD button, if you would like to switch on the audio CD playback with the timer function. Go directly to step 4 and continue reading.

To switch on the radio:

2Press the TUNER/BAND button.

3Now select the radio station which should be switched on with the timer function. To do this, use the PAUSE/ MEM UP and REPEAT/MEM DN buttons on the combi- nation unit. The memory slot of the selected radio sta- tion and its frequency will be shown in the display of the combination unit.

4Press the TIMER button.

5Press the MODE button twice. The input time and TIM- ER ON will be shown in the display.

6Now set the time at which the timer function should switch on the combination unit. Press the CLK ADJ but- ton once. The first two digits of the time display now flash.

7Set the first two digits of the time display to between 00 and 23. Use the SKIP forwards and SKIP backwards buttons to do this.

20 KH 2370