T-4 0(4) The 2nd / 1st digits
• It is assigned to indicate detail error description.
Code Status Description Cause Action
000000 Normal
Status ⎯⎯⎯
000001 Stop ⎯⎯⎯
Local mechanical error
1xxx11 ADF JAM
during TX ⎯⎯⎯
1xxx12
ADF Cover
Open during
TX
⎯⎯⎯
1xxx13 Power Fail
during TX ⎯⎯⎯
2xxx14 Memory Full
during RX ⎯⎯⎯
1xxx18 TX Job Lost ⎯⎯⎯
1xxx19 TX Job
deleted ⎯⎯⎯
Dial failure
xxxx15 No Dial
Tone ⎯⎯⎯
xxxx16
Redial All
Failed
(Number
Busy)
⎯⎯⎯
Comm. Error (at Phase-B)
xxxx31 TX T1
Time Out
• Did not receive any
response from other side
within the time set by
[Connect Time] of
[415. Fax Maintenance] in
Automatic transmission
• Did not receive any
response from other side
within 35 seconds in Man-
ual transmission.
• Automatic
transmission:
1.The fax num-
ber is wrong
2.Response
delay in recep-
tion side
• Manual trans-
mission:
Failure in
remote machine
• Automatic
transmission:
1.Check the fax
number
2.Extension of
Connect Time
• Manual transmis-
sion:
Check the status
of the remote
machine
xxxx32 V8 negotia-
tion Fail
• V.8 negotiation has failed. • Line failure • Retry TX
Comm. Error (at Phase-B)
xxxx40 Retry Out
• Did not receive any
response from other side
after three retries of DCS
(TCF).
• Failure in
remote machine
• Line failure
• Check the status
of the remote
machine
•
Retry TX