bizhub C360/C280/C220 5-12
5.2 Using the advanced preview 5
5.2.2 Sending with the advanced preview
The following describes the procedure after the original is loaded. For details on the general flow for sending
fax and scanned data, refer to page 5-2.
Sending with Advanced Preview
1Load the original.
2Specify the destination.
3Press the Proof Copy key.
4Select the original direction.
%On the original glass
%On the ADF
%If [Advanced Preview Setting] [Original Direction Confirmation Screen] is set to [OFF] in Adminis-
trator Settings, the screen for specifying the direction in which the original is loaded does not ap-
pear. For details on [Original Direction Confirmation Screen], refer to page10-11.
5Press the Start key.
The original is scanned, and the Preview screen appears.