Konica Minolta C650 manual Before use

Before use 1

No.	Part name	Description
6	[Reset] key	Press to clear all settings (except programmed settings)
		entered in the control panel and touch panel.
7	[Stop] key	Pressing the [Stop] key during an operation temporarily
		stops the operation.
8	[Proof Copy] key	Press to print a single proof copy to be checked before
		printing a large number of copies. (See p. 2-41)
9	[Start] key	Press to start the operation. When this machine is ready
		to begin the operation, the indicator on the [Start] key
		lights up in blue. If the indicator on the [Start] key lights
		up in orange, the operation cannot begin.
		Press to restart a stopped job.
10	Data indicator	Flashes in blue while a print job or fax is being received.
		Lights up in blue while a print job or fax is queued to be
		printed or is being printed.
11	[C] (clear) key	Press to clear a value (such as the number of copies, a
		zoom ratio, or a size) entered using the keypad.
12	Keypad	Use to type in the number of copies to be produced.
		Use to type in the zoom ratio.
		Use to type in the various settings.
13	[Enlarge Display] key	Press to enter or exit Enlarge Display mode. If
		authentication is performed with PageScope
		Authentication Manager, it does not enter Enlarge
		Display mode.
14	[Accessibility] key	Press to display the screen for specifying settings for
		user accessibility functions.
15	[Power Save] key	Press to enter Low Power mode. While the machine is in
		Low Power mode, the indicator on the [Power Save] key
		lights up in green and the touch panel goes off. To
		cancel Low Power mode, press the [Power Save] key
		again.
16	[Access] key	If user authentication or account track settings have
		been applied, press this key after entering the user name
		and password (for user authentication) or the account
		name and password (for account track) in order to use
		this machine.
17	Brightness dial	Use to adjust the brightness of the touch panel.
18	[Fax/Scan] key	Press to enter Fax/Scan mode.
		While the machine is in Fax/Scan mode, the indicator on
		the [Fax/Scan] key lights up in green.
19	[Copy] key	Press to enter Copy mode. (As a default, the standard-
		sized Copy mode screen is displayed.)
		While the machine is in Copy mode, the indicator on the
		[Copy] key lights up in green.

Before use Chapter 1

C650 1-3