Konica Minolta C650 manual Basic screen, touch Duplex/Combine. Otherwise touch

Before use Chapter 1

1 Before use

Selecting the position of the binding margin (Original Binding Position/ Binding Position settings)

If a double-sided document is loaded into the ADF, specify the position of the top of the back side of the document by specifying the binding margin position for the document.

Setting		Description
Left		Select this setting if the document is loaded with the binding margin at the
		left.
Top		Select this setting if the document that is loaded has a binding margin at the
		top.
Right		Select this setting if the document is loaded with the binding margin at the
		right.
Auto		With this setting, the binding margin is set at the top or at the left.
		Select this setting to automatically select the position of the binding margin.
		If the document length is 11-11/16 inch (297 mm) or less, a binding position
		along the long side of the document is selected.
		If the document length is more than 11-11/16 inch (297 mm), a binding
		position along the short side of the document is selected.
1	Position the document to be copied.

–For details on positioning the document, refer to "Feeding the document" on page 1-12.

2	In the Basic screen, touch [Duplex/Combine]. Otherwise touch the
	Original/Density tab.

1-20 C650