Konica Minolta C650 manual Setting, Otherwise, touch Main Screen, Select the desired position

Using copy functions Chapter 2

2 Using copy functions

3	Touch the button for the desired settings, and then touch [Position
	Setting].

4 Select the desired position.

–Touch [Auto] to automatically determine the stapling or hole-punching position according to the orientation of the loaded document. The paper is stapled or holes are punched along the long side of the paper if the document length is 11-11/16 inch (297 mm) or less or along the short side of the paper if the document length is more than 11-11/16 inch (297 mm).

When the “2 Position” Staple setting is selected

5	Touch [OK], and then touch [OK] in the next two screens that appear.
	Otherwise, touch [Main Screen].

The Basic screen appears again.

Note

The number of punched holes differs depending on the country (region) where the unit is installed. For details, consult your technical representative.

2-20 C650