Konica Minolta C650 manual Selecting the Paper settings, Basic screen, touch Paper

Using copy functions Chapter 2

2 Using copy functions

2.3Selecting the Paper settings

The paper size can be selected automatically according to the document size or it can be specified manually. Specify the paper size according to the corresponding procedure, depending on the desired copy settings.

Automatically selecting the paper size (“Auto” Paper setting)

The size of the loaded document is detected, and copies are produced using paper of the same size.

If the “Full Size” Zoom setting was specified, paper of the same size as the document is selected.

If the zoom ratio was increased or decreased, a paper size that corresponds to the specified zoom ratio is automatically selected.

2

Note

The “Auto Zoom” setting and the “Auto” Paper setting cannot both be selected at the same time. If the “Auto Paper Select” was selected at the “Auto Zoom” setting, the Zoom screen appears. Touch the button for the desired zoom ratio.

2

Reminder

When copying after selecting a paper tray with letterhead paper selected as the paper type, the copy speed will be slow, even with single-sided copying, since the paper alignment operation is performed.

1 In the Basic screen, touch [Paper].

The Paper screen appears.

2-6 C650