Konica Minolta C650 manual Specifying a Zoom setting

Using copy functions Chapter 2

2 Using copy functions

2.4Specifying a Zoom setting

The zoom ratio can be set in order to make a copy on paper with a size different than the document or to enlarge or reduce the size of the copy image.

The zoom ratio can be specified in any of the following ways.

Setting	Description
Auto Zoom*1	The most appropriate zoom ratio is automatically selected based
	on the size of the loaded document and the specified paper size.
Full Size	A copy that is the same size as the document (100.0%) is
	produced.
Enlarge	The most suitable enlargement zoom ratios for copying from
	common standard document sizes to standard paper sizes are
	preset.
Reduce*2	The most suitable reduction zoom ratios for copying from
	common standard document sizes to standard paper sizes are
	preset.
Zoom	By using the keypad, a zoom ratio between 25.0% and 400.0%
	can be typed in directly without changing the height-to-width
	ratio.
Set Zoom Ratio*2*3	Programmed zoom ratios can be recalled to be used again for
	copying.

*1 The “Auto Zoom” setting and the “Auto” Paper setting cannot both be selected at the same time.

If the “Auto Zoom” was selected at the “Auto Paper Select” setting, the Paper screen appears. Touch the button for the desired paper.

*2 When selecting a Reduce setting or a programmed zoom ratio, “Minimal” can be selected. Touch [Minimal] to produce a copy with the original image slightly reduced (93.0%) and centered in the paper.

The zoom ratio of the “Minimal” setting can be changed (between 90.0% and 99.9%). For details, refer to the User’s Guide [Copy Operations].

*3 The programmed zoom ratios can be changed. For details, refer to the User’s Guide [Copy Operations].

Follow the procedure described below to specify the Zoom setting.

2-10 C650