Konica Minolta C650 manual Panel, type in the fax number

Using fax/scan functions	3
The Fax Number screen appears.

2	Using the control panel keypad or the keypad that appears in the touch
	panel, type in the fax number.

–Otherwise, touch [Enter Registered No.], use the keypad to type in destination registration number, and then touch [Apply].

–To specify an additional recipient, touch [Next Destination], and then enter the number.

–To return to the Address Book screen, touch [Main Screen].

–When typing in a fax number:

[Tone]: If pulse dialing is being used, touch this button to send a push- button tone. This is used when a fax information service is being used. “T” appears in the screen. If pulse dialing is being used, use [ ] to switch to a push-button tone.

[Pause]: Touch this button to insert a pause when dialing. Touch [Pause] once to insert a 1-second pause. In addition, multiple pauses can be entered. “P” appears in the screen. If the PBX (private branch exchange) connection is enabled, touch [Pause] after the outside line access code (for example, “0”) for reliable dialing when transmitting from an inside line to an outside line. “P” appears in the screen.

[–]: Touch this button to insert the dash as separator symbol while dialing. This has no effect on the dialing. “–” appears in the screen.

Using fax/scan functions Chapter 3

C650 3-13