6 Option Setup
6.3 Specifying BOOTP
Perform the following steps to specify the settings for operation as a BOOTP server.
1.Select Option on the Setup menu to display the Option dialog box.
2.Click the BOOTP Setting tab.
3.To operate as a BOOTP server, put a check mark beside Enable BOOTP Server, and then specify the following BOOTP server settings.
To specify an IP address range for assigning the BOOTP server:
1.Select the Using a range option.
2.Enter IP addresses into the Start and End boxes, and then click the Append button.
The specified IP addresses are added to the Client List box.
To specify a single IP address for assigning the BOOTP server:
1.Select the Individually option.
2.Enter an IP address into the Single box, and then click the Append button.
The specified IP address is added to the Client List box.
36
