4 Changing the Device Setup
4.3.1 Setting up the Print Server
Perform the following steps to set up the print server for NetWare printing.
1.Type up to 26 characters into the Print Server Name box for the print server name.
Normally, you should leave the following items set to their initial defaults. Change these settings only when absolutely necessary for some reason.
Print Queue Scan Rate
Type in the interval, in seconds, to specify how often the print server should check the queue.
Ethernet Frame Type
Specify the Ethernet frame type.
2.After you are finished configuring the setup, click the Next button.
Note
•To configure a NetWare print setup, the server must be bound to at least one IPX frame.
17
