Korg ES-1 manual Using the part keys to edit the rhythm Realtime Recording, Erase

3. Basic operation (Quick Start)

• Using the part keys to edit the rhythm (Realtime Recording)

If you wish to hear the metronome while you record, refer to p.53 "Metronome settings."

1.Press the Pattern Mode key (the key will light). Use the cursor [▲][▼] keys to make the parameter select LED indicate Pattern.

2.Rotate the dial to select the pattern that you wish to edit.

3.Press the Rec key to enter record-ready mode (the Rec key will light, and the Play/ Pause key will blink).

4.Press the Play/Pause key to start the pattern (the Play/Pause key will light).

5.Strike the part keys at the desired rhythm. The pattern will continue playing back repeatedly, so you can continue recording additional material as long as the Rec key remains lit.

6.Press the Stop/Cancel key to stop recording. (The Rec key and Play/Pause key will go dark.) You can also press the Rec key without pressing the Stop/Cancel key, to stop re- cording but continue playback. (The Rec key will go dark, and the Play/Pause key will be lit.)

	2
1
	1
3,6	4

(Quick Start)

If you wish to save the pattern that you created, press the

WRITE key. (☞ "Saving a pattern that you create," below.)

The time that an audio part is heard (i.e., the gate time) is
determined not by how long you continue pressing the key,	6	5	5
but by the Pitch/Speed value (☞p.22 "Connecting various

sources to the audio inputs").

Erase

If you accidentally input a wrong note, you can hold down the Shift key and Rec key while the pattern con- tinues playing to erase the rhythm pattern for the cur- rently selected part (i.e., the part whose part key is lit).

3. Basic operation

19