Presentation Switcher / Scaler Buttons
7 Presentation Switcher / Scaler Buttons
The
8 INPUT SELECTOR buttons1, see section 7 .1
A PIP button2, see section 7 .2
BLANK, MUTE and FREEZE buttons
6 OSD buttons
A RESET TO VGA button
A PANEL LOCK button, see section 7 .3
7.1Switching an Input
Each INPUT SELECTOR button can be used to select the source. It can also be programmed to freeze the image or display a blank screen when pressed again. Refer to section 8 .5.9 for details.
You can switch seamlessly3 between each input4 that is connected to a source, by pressing the appropriate INPUT SELECTOR button. The OSD status appears superimposed over the top right corner of the screen for a few seconds, as Figure 11 illustrates:
AV-2
Auto(NTSC System)
Figure 11: OSD Input Status
1 The
3 For glitchless transitions between inputs
4 To set the image transition speed (fast, safe or moderate), see section 8 .5.5
16 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
