KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring the VP-724xl via the OSD MENU Screens
30
The zoom ratio and the zoom position are illustrated by a small rectangle
inside a transparent pop-up OSD Enlarge status box that appears at the top
right corner of the screen, as the example in Figure 26 illustrates:
Auto(NTSC System )
Enlarge x 400%
Figure 26: OSD Enlarge Status
When you change the zoom ratio or zoom position, the screen image is
adjusted accordingly, and the change is reflected in the pop-up OSD Enlarge
status box.
8.4.2.1 Adjusting the Zoom Ratio
You can adjust the zoom ratio to up to 400% via one or both of these methods:
Using the Zoom + and/or the Zoom - control keys
1
on the infra-red remote
control transmitter (see Figure 16). The pop-up OSD Enlarge status box
continuously displays the zoom ratio and position, as Figure 26 illustrates
Using the OSD Menu buttons, as Figure 27 illustrates
Figure 27: Geometry (Zoom Ratio) Screen
1 The and the buttons