Kramer Electronics VP-719xl, VP-723xl Preset Position Control Keys, Navigation Control Keys

Configuring the VP-724xl via the OSD MENU Screens

8.4.2.2 Adjusting the Zoom Position

You can adjust the zoom position via one or more of the following methods:

￿￿Using the preset position control keys (see Figure 28) on the infra-red remote control transmitter (see Figure 16), which instantly move the position of the zoom to up to nine preset fixed locations1

￿￿Using the navigation control keys on the infra-red remote control transmitter (see Figure 16), to fine tune the zoom position (that is, to slowly zoom-in at any location on the screen)2, as Figure 29 illustrates

Figure 28: Preset Position Control Keys

Figure 29: Navigation Control Keys

￿￿Using the OSD Menu buttons (see Figure 30)3

Figure 30: Geometry (Zoom Position Adjustment) Screen

1 For example, to zoom-in to the lower right corner of the image, press the button

2 For example, to zoom-in toward the lower right of the image, press the and the buttons separately, as required

3 For example, to zoom-in to the lower right part of the image instead of the top left part, press the + and DOWN OSD Menu buttons on the front panel separately, as required

31