Kramer Electronics VS-1616SDI user manual Reset ALL connections, Reset ALL ? Press Take to execute

Operating Your SDI Video Matrix Switcher

The MATRIX Display shows the sets of 2 blinking digits, representing the present input number for each specific output.

6.After completing the sequence, press the TAKE button to confirm the actions.

The inputs are cleared and the TAKE LED lights. The MATRIX Display does not show any Input # in its place.

7.2.3.3Clearing All Outputs

To clear all outputs (in the AT ONCE mode):

1.Press the ALL button.

The MATRIX Display shows all the sets of 2 blinking digits (each representing the present input number connected to that respective output) blinking simultaneously.

The STATUS Display shows the message:

all OUTs

2.Press the OFF button1.

All the outputs are cleared and the MATRIX Display momentarily shows the message:

Reset ALL connections

!!!!

To switch one input to all the outputs (in the CONFIRM mode (the TAKE LED is lit)):

1.Repeat step 1 above.

2.Press the OFF button 1.

The TAKE LED blinks and the MATRIX Display shows the message:

Reset ALL ?

Press TAKE to execute

3.Press the TAKE button to confirm.

All the outputs are cleared and the TAKE LED lights.

7.2.4Storing and Recalling Setups

You can store up to 99 settings in the non-volatile memory with the ability to recall each of those settings.

1 You can press the OFF button first, and then the ALL button (the order is irrelevant)

25