Kramer Electronics VS-1616SDI user manual Using the Front Panel Buttons

Operating Your SDI Video Matrix Switcher

Figure 12: Default Startup Status Display Sequence

7.2Using the Front Panel Buttons

You can switch (see section 7￿ .2.2) and clear (see section 7￿ .2.3):

￿One input to one output

￿Several inputs to several outputs

￿One input to all outputs

7.2.1Confirming the Settings

Choose to work in the AT ONCE mode or the CONFIRM mode: In the AT ONCE (default1) mode:

￿Actions require no user confirmation

￿Execution is immediate

￿No protection is offered against changing an action in error

In the CONFIRM mode2:

￿You have an optional method to help avoid making a mistake

￿Every action requires user confirmation

￿Execution is delayed3 until the user confirms the action

￿Protection is offered to prevent erroneous switching

￿You can key-in several actions and then confirm them by pressing the TAKE button once, to simultaneously switch several monitors

1 For all actions except storing/recalling setups

2 The CONFIRM mode is the default for storing/recalling setups (see section 8￿ .5)

3 Failure to press the TAKE button within about 30 seconds (the Timeout) will abort the action

19