set mode
Syntax:
set mode <status> Description:
To set up the mode of IGMP Snooping. Argument:
<status>: 0:disable, 1:active, 2:passive
Possible value:
<status>: 0,1or 2
Example:
show igmp-snooping
Syntax:
show
To display IGMP snooping mode and allowed IP multicast entry. Argument:
None.
Possible value:
None.
Example:
IP Multicast: |
|
1) IP Address | : 224.1.1.1 |
VLAN ID | : 0 |
Member Port : 22
show multicast
Syntax:
show multicast Description:
To display IP multicast table. Argument:
None.
Possible value:
None.
Example:
IP Multicast: None
195
