57
3-2-2. Port Configuration Port Configuration is applied to change the setting of each port. In this conf igurat ion
function, you can set/reset the following functions. All of them are described in
detail below.
Fig. 3-11
Function name:
Port Configuration
Function description:
It is used to set each port’s operation mode. The switch supports 3 parameters
for each port. They are State, Speed/Duplex and Flow Control.
Parameter description:
State:
Set the communication capability of the port is Enabled or Disabled.
When enabled, traffic can be transmitted and received via this port.
When disabled, the port is blocked and no traffic can be transferr ed
through this port. Port State is configurable by the user. There are only
two states “Enable” and “Disable” able to choose. If you set a port’s state
“Disable”, then that port is prohibited to pass any traff ic, even it looks
Link up.
Default: Enable.