Kyocera FS-1020D manual Indicators, Keys, Reference Name Status Meaning, Reference Name Function

Operator Panel

1.1.1Indicators

Refer to the following table for the name and description of each indicator. The same indicator can have a variety of meanings, depending on the speed at which it is flashing. For details, see Chapter 3.

Reference	Name			Status	Meaning
1	Ready indicator			Lit	Indicates online status (printing is possible).
				Flashing	• An error has occurred, but printing resumes when the
					key is pressed.
					• Offline status. You cannot print, but the printer can receive
		(Green)			data.
					• The printer is in sleep mode.
				Off	Printing has stopped because an error has occurred.
2	Data indicator			Lit	The printer is processing data.
				Flashing	The printer is receiving data.
		(Green)
3		Attention		Lit	The printer cover is open.
		indicator
				Flashing	• A paper jam has occurred.
					• The paper cassette is not inserted properly or the paper has
			(Red)		run out.
				Off	The printer status is normal.
4	Toner indicator			Lit	The printer has stopped because the toner is exhausted.
				Flashing	The toner is running low.
			(Red)
Table 1-1

1.1.2Keys

		Refer to the following table for the name and description of the basic
		functions of each key.
Reference	Name	Function
5	key	Cancels printing in progress when pressed for 1 second or more.
	(Cancel key)
6	key	• Switches between online and offline when pressed for less than 3 seconds.
		• Depending on the error message displayed in the KM-NET for Clients, there
	(Go key)	are cases where operation will continue after pressing this key. If such a
		message appears, operation resumes when this key is pressed.
		(The KM-NET for Clients utility is used for making printer setting from a
		computer and is contained on the Kyocera Mita Software Library CD-ROM
		that is supplied with the printer. For details, see the KM-NET for Clients
		Operation Guide.)

•Prints a standard status page† when pressed for 3 seconds or more and less than 10 seconds.

•Prints a service status page†† when pressed for 10 seconds or more.

Table 1-2

†For a full description of the standard status page, see the next page. †† The service status page is used for service purposes.

1-3