Kyocera K126C manual Using voice features, Waking up the phone, Answering the phone

–Say “Clear” to erase the last digit entered. The phone responds: “Digit cleared.”

To clear the entire phone number, say “Clear” again. When the phone prompts you with “Clear entire phone number?”, say “Yes” to clear or “No” to cancel.

–Say “Call” to dial the number.

–Say “Verify” to cause phone to repeat the set of digits that you input.

–Say “Cancel” to exit voice recognizer and return to the main screen.

–Speak a digit to enter the next digit. Once the phone repeats the digit, you can speak the next digit or pause to hear the prompt.

Using voice features

You can use voice commands to make a phone call or to answer the phone only if your phone is connected to the AC adaptor.

Waking up the phone

If your phone is connected to a Kyocera hands-free headset, you can use the voice command to activate the phone to make a phone call.

To activate the Voice wake-up setting:

•Select Menu → Settings → Voice Services → Voice wake-up → Enabled with ext. power.

To wake up the phone:

1.Say “Wake up” and listen for a tone.

2.Say “Wake up” again until you hear two tones.

Answering the phone

You can set your phone to (1) answer automatically or

(2) answer using a voice command.

Answering automatically

You can set your phone to answer automatically.

Note: This setting also works with the portable hands- free headset.

•Select Menu → Settings → Accessories → Auto Answer → After 5 seconds.

Answering using voice commands

If Auto Answer is turned off, you can use a voice command to answer an incoming call when using a hands-free headset.

•Select Menu → Settings → Accessories → Auto Answer → Disabled.

42 Using Voice Recognition