LaCie Slim DVD±RW • Design by Sam Hecht

Foreword

User Manual

page 8

 

 

 

1.3. Views of the Drive

Front View

1.Disc Tray – Open the tray by pressing the load/eject button,

then place a DVD or CD into the tray with the label facing up. Close the tray by pushing the load/eject button or pushing the front part of the tray. This drive has not been designed to ac- cept media with cartridges.

2. Drive Activity LED

3.Load/Eject Button – Push this button to open the media tray.

4. Emergency Eject Hole – Insert a straightened paper clip (or similar object) and push to eject the tray if the load/eject button does not work. In normal operation, the eject button should always be used to unload the tray. If you must use the

emergency eject hole, make sure the drive’s power is turned Fig. 01 off and wait until disc rotation has stopped.

Rear View

1.Power Supply Connection – This is where you plug in the op- tional AC adapter. See section 2. Connecting Your LaCie Slim

DVD±RW for more information.

2.Hi-Speed USB 2.0 Port – This is where you plug in the USB 2.0 Y cable supplied with the drive. See section 2. Connecting Your LaCie Slim DVD±RW for more information.

IMPORTANT INFO: You may attach an optional external power supply (not included) to the power supply connector.

Fig. 02

Page 8
Image 8
LaCie 301910 Views of the Drive, Front View, Rear View, Load/Eject Button Push this button to open the media tray