59
ELEVATION POTENTIOMETER CALIBRATION |
ELE VAT IO N
POT EN T IO ME TE R P/N #7 1013
AD JU ST M EN T SH AF T
E LEVA TION MO TO R
P/N # 70088 11 0vo lt
P/N # 70126 22 0vo lt
EL EVAT ION N U T
N OT E: ELON GA TED BR AC KET HO LES AR E FO R
POT EN T IO M ET ER F IN E AD JUS TM EN T .
Enter Diagnostic Mode:
1.Press OFF to turn treadmill off.
2.Hold START and DISPLAY at the same time, then release the buttons when the treadmill lights up.
Calibrate the elevation potentiometer:
1.Visually confirm treadmill is level. (0% grade)
2.The potentiometer should read between 1 and 4 in the selectable display window.
3.If the setting is incorrect, follow the steps below.
STEP 1: Turn the post of the potentiometer all the way CLOCKWISE.
STEP 2: Slowly turn the potentiometer
4.Carefully install potentiometer into the motor housing.
*NOTE: The setting may vary when inserting the potentiometer into the motor. As long as the change is minimal, fine adjustment can be achieved after the potentiometer is secured in motor housing.
5. Press OFF to turn treadmill off.
