Lanier LD235, LD245 manual Job Preset, Press To Printing

Job Preset

You can set up the next copy content during copying.

If a long copy job is in progress and you do not want to wait for it to fin- ish, you can use this function to set up the next copy job in advance. When the current copy job is finished, the next job will start automatically.

A Press [NextJob] when "Copying..." is shown.

B Set up the next copy job.

C Place the originals in the ADF, and then press the {Start}key.

All originals are scanned.

D Press [To "Printing"].

Returns to the initial copy display.

After the current copy job, the next job starts automatically.

Note

❒You can switch the display to the current copy job by pressing [To "Printing"]. You can switch the display to the preset job by pressing [To "Reserving"].

Basic Procedure

2

19