Copying
18
2
-How to operate
❖To stop the machine during a multi-
copy run.
Press the {Clear/Stop} key.
❖To return the machine to the initial
condition after copying.
Press the {Clear Modes} key.
❖When clearing entered values.
Press the {Clear/Stop} key or [Clear]
on the display.
❖To check the settings.
Press the {Check Modes} key.
Interrupt Copy
Use this function if you want to inter-
rupt a long copy job to make urge ntly
needed copies.
Limitation
❒You cannot use the Interrupt Copy
function when fax originals are be-
ing scanned or the scanner func-
tion is being used.
APress the {Interrupt} key.
The Interrupt indicator goes on.
When the originals stop scanning
ARemove the originals that were
being copied and place the
originals you want to copy.
BPress the {Start} key.
The machine starts making the
copies.
CWhen copying is complete, re-
move the originals and copies.
DPress the {Interrupt} key again.
The Interrupt indicator goes off.
E
When the display prompts you,
place the remaining originals
again before interrupting.
FPress the {Start} key.
Note
❒The interrupt copy job set-
tings will be restored and the
machine will continue copy-
ing from where it left off.
When the machine keeps
copying
APlace the originals you want to
copy.
BPress the {Start} key.
The machine stops the previous
original job and starts copying
the original.
CWhen copying is complete, re-
move originals and copies.
DPress the {Interrupt} key again.
The Interrupt indicator goes off.
The interrupt copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
❒See p.94 “Tone: Original remains”.