Lanier LD245, LD235 manual Covers, Front cover, Press First Printing Page, enter

Copying

If you selected (1-1, 1-2,…)

	A Press [Change] on the right side.
	B Press [First Printing Page], enter the
		original sheet number from
		which to start printing, and then
2		press the {#}key.

Note

❒To change the number entered, press [Clear] or the {Clear/Stop} key, and then enter a new number.

C Press [First Chapter No.], enter the chapter number from which to start numbering with the number keys, and then press the {#}key.

Note

❒You can enter between 1 and 9999 for the chapter number from which to start numbering.

D Press [Numbering from / to], enter the page number from which to start printing with the number keys, and then press the {#}key.

E Press [OK].

F When page designation is com- plete, press [OK].

Covers

Using this function, you can create cover sheets by adding additional pages of different paper or copying existing pages on different paper.

Preparation

Before selecting this function, set the tray for the front cover paper. See “Cover Sheet Tray”in “Tray Paper Settings”, General Settings Guide.

Note

❒The cover sheet should be the same size and orientation as the copy pa- per.

❒You cannot place the copy paper in the bypass tray.

❒When selecting [Copy], select wheth- er the front and back covers are copied one-sided or two-sided. See “Cover Sheet Tray”in “Tray Paper Settings”, General Settings Guide.

❖Front cover

The first page of your originals is copied on specific paper sheet for covers, or a cover sheet is inserted before the first copy.

• Copy

• Blank

70