There are three selections for Power Management, three of which have fixed mode setting
Disable (Default) | No power management. Disables all four modes. |
Min. Power Saving | Minimum power management. Doze Mode=1hr. Standby Mode =1hr., |
| Suspend Mode=1hr., and HDD Power Down=15min. |
Max. Power Saving | Maximum power management. |
| Mode=1min., Standby Mode=1min., Suspend Mode=1min., and HDD Power |
| Down=1min |
User Defined | Allows you to set each mode individually. When not disabled, each of the |
| ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges |
| from 1 min. to 15 min. and disabled |
Video Off In Suspend : This option is for choosing the setting in which the monitor will turn off. The default setting is “Suspend”.
Always On | The monitor will be turned on |
Suspend | The monitor will be turned off. |
Video Off Method : This determines the manner in which the monitor is blanked. The default setting is “V/H SYNC+Blank”.
V/H SYNC+Blank | This selection will cause the system to turn off the vertical and |
| horizontal synchronization ports and write blank to the video buffer. |
Blank Screen | This option only writes blanks to the video buffer. |
Suspend Type : Options are from “1 Min”. to “15 Min”.
HDD Power Down: Options are from “1 Min”. to “15 Min”. and “Disable”. The IDE hard drive will spin down if it is not accessed within a specified length of time.
After you have made your selection in the POWER MANAGEMENT SETUP, press the <ESC> key to go back to the main program screen.
