Stand

Incident-light stand

Side-faced column ￿ Remove the stage plate. incident-light base ￿ Insert 3 Allen screws into the underside

of the baseplate and secure them to the bottom end of the side-faced column.

￿Insert the stage plate.

 

To fit the microscope carrier and the stereomicroscope,

 

see page 34

 

Transmitted-light stand

Side-faced column

Pull the power cable out of the socket in the stand.

transmitted-light base

 

￿ Remove the glass stage plate. ￿ Carefully invert the transmitted- light base and remove 7 Allen

screws from the base.

￿Lift off the lower part of the base.

￿Reverse the upper part of the base.

￿Insert 3 Allen screws into the cover

plate from beneath and secure them to the bottom end of the side- faced column.

￿ Replace and secure the base.

￿Insert the glass stage plate.

￿Fit the microscope carrier and the stereomicroscope as described on page 34.

Technical data see page 74

Leica M Stereomicroscopes – Assembly

23

Page 23
Image 23
Leica MZ75, MZ16 A, MS5, MZ6, MZ125, MZ16 FA Stand Incident-light stand, Transmitted-light stand, Insert the stage plate, See