Cold light source Leica CLS series

The Leica CLS series is a high-performance line for high light intensity within the smallest possible space and flicker-free white light with the lowest possible thermal effect on the ob- jects. The comprehensive line of accessories enables unlimited use. The CLS series is produced of antistatic material.

When using the ring lamp (76 mm) on the planachromatic objective 0.8(80 mm), a special adapter (10 447 078) is required.

For a detailed information, refer to the user manual Leica CLS.

Fiber-optic• The clamp of the fiber-optic light guide cannot be light guide attached to the microscope carrier AX.

￿ Turn the clamping screw out of the clamp.

￿Hold the clamp in the opening of the

microscope carrier.

￿ Push the clamping screw through the holes in the microscope carrier and in the broader part of the clamp, and screw it finger-tight to the narrow part of the clamp.

￿Insert the fiber-optic light guide into the clamp.

￿Switch on the power unit.

￿Align the light spot with the object.

￿Retighten the clamping screw.

Leica LED illumination

The Leica LED1000 (Laser Emitting Diode) illumination is avail- able with ring illuminator and/or spot and suitable for routine tasks with the Leica MS5, MZ6, MZ75, MZ95 stereomicroscopes. LEDs, which do not develop any heat, are used as illuminators. The color temperature measures 5000 K (daylight).

For details see the separate instructions for use for the LED illumination.

46

Leica M Stereomicroscopes – Illuminations

Page 46
Image 46
Leica MZ95, MZ16 A, MS5, MZ6, MZ125, MZ16 FA, MZ75 user manual Cold light source Leica CLS series, Leica LED illumination