Leica MZ75, MZ16 A, MS5, MZ6, MZ125, MZ16 FA, MZ95 user manual Supply line lamp 25W, Coaxial illuminator

Supply (line) lamp 25W

Follow the safety instructions given on page 7.

￿Fit the lamp holder and lamp as described below (incident-light lamp 6 V/10 W).

￿Connect the 25 W supply (line) lamp to the power supply.

￿Switch on the supply (line) lamp.

￿Align the light spot with the object as described.

Coaxial illuminator

•This illuminator is for observing and photographing flat, highly-reflecting objects such as wafers, integrated circuits and polished metal sections.

•The coaxial incident light housing fits like an accessory tube between the optics carrier and the binocular tube, or between the optics carrier and the phototube (page 50).

•For the MZ75 and MZ95, fit the objective

preferably to the spacer ring (10 446 300), page 32. This will completely illuminate the largest field of view.

•A quarter-wave plate is required when the microscope carrier AX is used in the vertical position.

￿Using the clamping screw, secure the quarter-wave plate to the objective mount.

￿Using the knurled ring, turn the quarter-wave plate until the required effect is obtained.

Please observe the notes on the use of the aperture in the AX microscope carrier (p. 19).

Leica M Stereomicroscopes – Illuminations 47