6 V/10 W incident lamp
•The 6 V/10 W lamp is an inclined incident source for illuminating spatial objects
•By using two lamps, you can soften or eliminate shadows.
•At the nominal voltage (6 V), the color temperature is 2700 K.
Assembly Release the clamping screw. Unfold the lampholder arm.
Retighten the clamping screw.
Lampholder ➜ Use the screw to secure the clamp to clamp for
columns below the focusing drive.
Use the connector to attach the lamp- holder arm to the clamp, on either the right or the left.
Lampholder ➜ Fit the ∅ 25 mm adapter to the cast foot.
cast foot Using the connector, attach the lampholder to the adapter.
Lampholder ➜ Remove the objective.
objective Slide the adapter over the objective.
Using the connector, attach the lampholder to the adapter.
Lampholder ➜ Unscrew a connector from the lampholder. inclinable focusing Release the clamping screw.
drive Using the thread, secure the lampholder to the focusing drive.
Retighten the clamping screw.
Lamp housing ➜ Attach the lamp to the connector on lampholder arm the lampholder arm.
Fit the filter holder, complete with KG1
•A total of 4 filter holders with ∅ 50 mm filters can be attached.
40 | Leica M Stereomicroscopes – Illuminations |
