TPS400 Mining Manual-1.0.0en Setting out
28
Orthogonal setout
The position offset between
measured point and setout point
is indicated in a longitudinal and
transversal element.
dLength: Longitudinal offset:
positive if nominal
point further away.
dTrav.: Transversal offset,
perpendicular to
line-of-sight: positive
if nominal point is to
the right of
measured point.
dHeight: Height offset:
positive if point to be
setout is higher than
measured point.
Cartesian setout
Setting out is based on a
coordinate system and the
offset is divided into a north and
east element.
dEast Easting offset
between setout and
actual point.
dNorth Northing offset
between setout and
actual point.
dHeight: Height offset:
positive if point to be
setout is higher than
measured point.