Setting out

Polar setout

This program calculates the required elements to stakeout points from coordinates or manualy entered angles, horizontal distances and heights. Setting out differences can be displayed continuously.

Setting out coordinates from memory

Procedure:

 

Select the point.

[DIST]

Starts measurement

 

and calculation of

 

the stake-out

 

elements.

[REC]

Saves the displayed

 

values.

[B&D]

Input direction and

 

Hz-distance of stake

 

out point.

[MANUAL] Enables simplified input of a point without ptID and without the possibility of storing the data of the point.

Normal indication of polar setout offsets dHz, dHD, ddH.

dHz:

Angle offset: positive

 

if point to be set-out

 

is to the right of the

 

actual direction.

dHD:

Longitudinal offset:

 

positive if point to be

 

setout is further

 

away.

ddH:

Height offset:

 

positive if point to be

 

setout is higher than

 

measured point.

TPS400 Mining Manual-1.0.0en

27

Setting out

 

Page 27
Image 27
Leica TPS400 user manual Polar setout, Setting out coordinates from memory Procedure