Upgrading the hard disk drive

7.Reinstall the cover by aligning the front side of the cover first 1, and closing the cover 2. Then tighten the two screws 3.

21

1

3

3

8.Reinstall the battery.

9.Turn the computer over again. Connect the ac adapter and cables to the computer.

Replacing memory

Important

Read Safety and Warranty Guide before replacing memory.

Increasing memory capacity is an effective way to make programs run faster. You can increase the amount of memory in your computer by installing a PC2-5300 (double data rate (DDR) II 667) synchronous dynamic random access memory (DRAM) unbuffered small outline dual inline memory module (SO-DIMM), available as an option, in the memory slot of your computer. SO-DIMMs with different capacities are available.

Note: Use only the memory types supported by your computer. If you incorrectly install the optional memory or install an unsupported memory type, a warning beep will sound when you try to start the computer.

To install an SO-DIMM, do the following:

1.Touch a metal table or a grounded metal object. This action reduces any static electricity in your body, that could damage the SO-DIMM. Do not touch the contact edge of the SO-DIMM.

Chapter 5. Upgrading and replacing devices 27

Page 35
Image 35
Lenovo 3000 V100 warranty Replacing memory