Replacing memory

2.Turn off the computer; then disconnect the ac adapter and all cables from the computer.

3.Close the computer display, and turn the computer over.

4.Remove the battery.

5.Unfasten the two screws 1 on the cover of the memory slot, and remove the cover 2.

2

1

1

6.If the SO-DIMM is already installed in the memory slot, remove it to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save it for future use.

7.Find the notch on the contact edge side of the SO-DIMM.

Attention: To avoid damaging the SO-DIMM, do not touch its contact edge.

28Lenovo 3000 V100 Service and Troubleshooting Guide

Page 36
Image 36
Lenovo 3000 V100 warranty Replacing memory