Lenovo 70B89000NA, 70B89003NA Naming Your ix4-300d Network Storage, Setting up Active Directory

Setting up Your ix4-300d Network Storage

Naming Your ix4-300d Network Storage

You can provide a meaningful name for your ix4-300d using the Device Identification page. This page in the ix4300d Management Console enables you to change the Storage Device Name, the Storage Device Descriptive Name, and the Workgroup Name.

Change any of these by editing the text fields. Click Apply to save your changes.

●Device Name: Enter a name for the ix4-300d device. Use a name that will help you identify it on your network.

●Device Descriptive Name: Enter a descriptive name for the ix4-300d device. This name can provide additional detail that identifies the device. If you leave this field blank, the default device name is used.

●Workgroup Name: Enter a workgroup name for the ix4-300d device if you need to change the default name. The workgroup name identifies a group of computers that share information with each other. Change the workgroup name only if you explicitly define a workgroup on your network. Most users won't need to change the workgroup name, unless they have explicitly defined a different workgroup on their other computers.

Renaming the ix4-300d will require a device restart.

Setting up Active Directory

If your ix4-300d supports Active Directory, you configure AD on the Device Identification page. Refer to Configuring Your ix4-300d for Active Directory.

10 Naming Your ix4-300d Network Storage