3.In some models, you might have to remove the PCI adapter in order to gain access to the battery.
Figura 7. Removing the PCI adapter
4.Slide the drive bay assembly forward until the drive bay assembly is aligned with the two slots on the sides of the chassis and remove the drive cables from the system board. Then pull upward on the handle 1 to remove the drive bay assembly completely from the computer.
Figura 8. Removing the drive bay assembly
Installing internal options
Important
Read “Handling
Installing memory
Your computer has two connectors for installing double date rate 2 dual inline memory modules (DDR2 DIMMs) that provide up to a maximum of 4.0 GB of system memory.
When installing memory modules, the following rules apply:
Capitolo 3. Installing options and replacing hardware 11
