Capitolo 3. Installing options and replacing hardware
Attention
Do not open your computer or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer for the computer. To obtain copies of the Safety and Warranty Guide, go to http://www.lenovo.com/support.
Nota: Use only the parts provided by Lenovo.
Tools required
To install some options in your computer, you might need a
Installing external options
External speakers, a printer, or a scanner can be connected to your computer. For some external options, you must install additional software in addition to making the physical connection. When adding an external option, see “Locating controls and connectors on the front of your computer” a pagina 4 and “Locating connectors on the rear of your computer” a pagina 5 to identify the required connector, and then use the instructions that come with the option to help you make the connection and install any software or device drivers that are required for the option.
Removing the cover
Important
Turn off your computer and wait 3 to 5 minutes to let the computer cool before removing the computer cover.
To remove the computer cover:
1.Remove any media (diskettes, CDs, or tapes) from the drives, shut down your operating system, and turn off all attached devices.
2.Unplug all power cords from electrical outlets.
3.Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer.
4.Remove any locking devices such as a padlock that secure the cover.
© Lenovo 2005, 2007. Portions © IBM Corp. 2005. | 9 |
