6.Go to Capitolo 4, “Completing the parts replacement”, a pagina 31.
Replacing a mouse
Attention
Do not open your computer or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer for the computer. To obtain copies of the Safety and Warranty Guide, go to http://www.lenovo.com/support.
This section provides instructions on how to replace a mouse.
1.Remove any media (diskettes, CDs, or tapes) from the drives, shut down your operating system, and turn off all attached devices.
2.Unplug all power cords from electrical outlets.
3.Locate the mouse connector.
Nota: Your mouse might be connected to a standard mouse connector 1or a USB connector 2 in the front or rear of your computer. See “Locating connectors on the rear of your computer” a pagina 5 or “Locating controls and connectors on the front of your computer” a pagina 4.
Figura 38. Mouse connectors
4.Disconnect the failing mouse cable from the computer.
5.Connect the new mouse to the appropriate connector on the computer.
6.Go to Capitolo 4, “Completing the parts replacement”, a pagina 31.
