Figure
1. | Controls and connectors | . | . | 4 | 23. | Aligning the pins with the holes in the hard |
|
|
2. | Connector locations | . | . | 5 |
| disk drive | . | 21 |
3. | Component locations | . | . | 6 | 24. | Removing the diskette drive | . | 22 |
4. | System board parts locations | . | . | 7 | 25. | Retaining bracket for diskette drive . . . | . | 22 |
5. | Sliding the cover | . |
| 10 | 26. | Installing the new diskette drive . . . . | . | 23 |
6. | Removing the bezel | . |
| 10 | 27. | Removing the optical drive | . | 23 |
7. | Removing the PCI adapter | . |
| 11 | 28. | Retaining bracket for optical drive . . . . | . | 24 |
8. | Removing the drive bay assembly . . . . | . |
| 11 | 29. | Installing the new optical drive | . | 24 |
9. | Retaining clips | . |
| 13 | 30. | Removing the heat sink | . | 25 |
10. | Positioning the memory module . . . . | . 13 | 31. | Clamping the heat sink to the plastic retention |
|
| ||
11. | Opening the adapter latch | . |
| 14 |
| bracket . . . . . . . . . . . . . . 25 | ||
12. | Securing the adapter | . |
| 14 | 32. | Removing the system fan assembly . . . | . | 26 |
13. | Drive bays | . |
| 16 | 33. | Removing the memory module | . | 27 |
14. | Retaining bracket | . |
| 17 | 34. | Installing the memory module | . | 27 |
15. | Installing the drive | . |
| 17 | 35. | Removing the adapter | . | 28 |
16. | Connecting a parallel ATA hard disk drive |
|
| 17 | 36. | Installing the new adapter | . 29 | |
17. | Connecting a serial ATA drive | . |
| 18 | 37. | Keyboard connectors | . | 29 |
18. | Retaining bracket | . |
| 18 | 38. | Mouse connectors | . | 30 |
19. | Installing the diskette drive | . |
| 18 | 39. | Sliding on the cover | . | 31 |
20. | Battery removal | . |
| 19 | 40. | Kensington lock location | . | 33 |
21. | Battery installation | . |
| 20 | 41. | Padlock loop | . | 34 |
22. | Removing the hard disk drive | . 21 |
|
|
|
| ||
© Lenovo 2005, 2007. Portions © IBM Corp. 2005. | v |
