Figura 22. Removing the hard disk drive
5.Install the new drive into the blue bracket, flex the bracket, and align the pins 1 through 4on the bracket with the holes in the hard disk drive. Do not touch the circuit board 5 on the bottom of the hard disk drive.
Figura 23. Aligning the pins with the holes in the hard disk drive
6.Position the hard disk drive and bracket so that it engages the retaining clips in the bottom of the chassis when you slide the bracket to the right.
7.Slide the hard disk drive and bracket to the right until it snaps into position.
8.Connect the signal and power cables to the rear of the hard disk drive.
Capitolo 3. Installing options and replacing hardware 21
