LevelOne FBR-1404TX user manual Connection Log Messages, Message Description

		Operation and Status
Buttons
Connect	If not connected, establish a connection to your ISP.
Disconnect	If connected to your ISP, hang up the connection.
Clear Log	Delete all data currently in the Log. This will make it easier to
	read new messages.
Refresh	Update the data on screen.
Connection Log Messages
Message		Description
Connect on Demand		Connection attempt has been triggered by the "Connect
		automatically, as required" setting.
Manual connection		Connection attempt started by the "Connect" button.
Reset physical connection		Preparing line for connection attempt.
Connecting to remote		Attempting to connect to the ISP's server.
server
Remote Server located		ISP's Server has responded to connection attempt.
Start PPP		Attempting to login to ISP's Server and establish a PPP
		connection.
PPP up successfully		Able to login to ISP's Server and establish a PPP connection.
Idle time-out reached		The connection has been idle for the time period specified in
		the "Idle Time-out" field. The connection will now be termi-
		nated.
Disconnecting		The current connection is being terminated, due to either the
		"Idle Time-out" above, or "Disconnect" button being clicked.
Error: Remote Server not		ISP's Server did not respond. This could be a Server problem,
found		or a problem with the link to the Server.
Error: PPP Connection		Unable to establish a PPP connection with the ISP's Server.
failed		This could be a login problem (name or password) or a Server
		problem.
Error: Connection to		The existing connection has been lost. This could be caused
Server lost		by a power failure, a link failure, or Server failure.
Error: Invalid or unknown		The data received from the ISP's Server could not be proc-
packet type		essed. This could be caused by data corruption (from a bad
		link), or the Server using a protocol which is not supported by
		this device.

33