LevelOne FBR-1404TX user manual Connection Status Pptp, Data Pptp Screen, Pptp Status

LevelOne Broadband VPN Gateway User Guide

Connection Status - PPTP

If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be displayed when the "Connection Details" button is clicked.

Figure 24: PPTP Status Screen

Data - PPTP Screen

Connection

Physical Address	The hardware address of this device, as seen by remote devices on
	the Internet. (This is different to the hardware address seen by
	devices on the local LAN.)
IP Address	The IP Address of this device, as seen by Internet users. This address
	is allocated by your ISP (Internet Service Provider).
PPTP Status	This indicates whether or not the connection is currently established.
	• If the connection does not exist, the "Connect" button can be
	used to establish a connection.
	• If the connection currently exists, the "Disconnect" button can be
	used to break the connection.
Connection Log
Connection Log	• The Connection Log shows status messages relating to the
	existing connection.
	• The "Clear Log" button will restart the Log, while the Refresh
	button will update the messages shown on screen.
Buttons
Connect	If not connected, establish a connection to your ISP.
Disconnect	If connected to your ISP, hang up the connection.

34