Setup

Configure or use any of the following:

Chapter 9:

Config File backup/restore

Other Features and Settings

 

PC Database

 

Remote Admin

 

• Routing (RIP and static Routing)

 

Upgrade Firmware

 

UPnP

 

 

 

 

Where use of a certain feature requires that PCs or other LAN devices be configured, this is also explained in the relevant chapter.

Configuration Program

The LevelOne Broadband VPN Gateway contains an HTTP server. This enables you to con- nect to it, and configure it, using your Web Browser. Your Browser must support JavaScript. The configuration program has been tested on the following browsers:

Netscape V4.08 or later

Internet Explorer V4 or later

Preparation

Before attempting to configure the LevelOne Broadband VPN Gateway, please ensure that:

Your PC can establish a physical connection to the LevelOne Broadband VPN Gateway. The PC and the LevelOne Broadband VPN Gateway must be directly connected (using the Hub ports on the LevelOne Broadband VPN Gateway) or on the same LAN segment.

The LevelOne Broadband VPN Gateway must be installed and powered ON.

If the LevelOne Broadband VPN Gateway 's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the LevelOne Broad- band VPN Gateway is allocated a new IP Address during configuration.

Using UPnP

If your Windows system supports UPnP, an icon for the LevelOne Broadband VPN Gateway will appear in the system tray, notifying you that a new network device has been found, and offering to create a new desktop shortcut to the newly-discovered device.

Unless you intend to change the IP Address of the LevelOne Broadband VPN Gateway, you can accept the desktop shortcut.

Whether you accept the desktop shortcut or not, you can always find UPnP devices in My Network Places (previously called Network Neighborhood).

Double - click the icon for the LevelOne Broadband VPN Gateway (either on the Desk- top, or in My Network Places) to start the configuration. Refer to the following section Setup Wizard for details of the initial configuration process.

9

Page 12
Image 12
LevelOne FBR-1404TX user manual Configuration Program, Preparation, Using UPnP