VPN
VPN Policies
This section covers the configuration required on the LevelOne Broadband VPN Gateway when using Manual Key Exchange (Manual Policies) or IKE (Automatic Policies).
Details of using Certificates are covered in a later section.
VPN Policies Screen
To view this screen, select VPN Policies from the VPN menu. This screen lists all existing VPN policies. If no policies exist, the list will be empty.
Figure 47: VPN Policies
Note that the order of policies is important if you have more than one policy for particular traffic. In that case, the first matching policy (for the traffic under consideration) will be used.
Data - VPN Policies Screen
VPN List
Policy Name | The name of the policy. When creating a policy, you should select a |
| suitable name. |
|
|
Enable | This indicates whether or not the policy is currently enabled. Use the |
| "Enable/Disable" button to toggle the state of the selected policy. |
|
|
Remote VPN | The IP address of the remote VPN endpoint (Gateway or client). |
Endpoint |
|
|
|
Key Type | This will indicate "Manual" (manual key exchange) or "IKE" (Internet |
| Key Exchange) |
|
|
Operations |
|
|
|
Add
Edit
To add a new policy, click the "Add" button. See the following section for details.
To Edit or modify an existing policy, select it and click the "Edit" button.
71
